Removal And Installation: Generator: Installation

WARNING: This page is about a different car, the 2018 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.

Radial arm installation only

1. Tighten to 9 Nm (80 lb-in).
2. Tighten to 17 Nm (150 lb-in).
Courtesy of FORD MOTOR COMPANY

All vehicles

Courtesy of FORD MOTOR COMPANY
- Tighten to 8 Nm (71 lb-in).
Courtesy of FORD MOTOR COMPANY
- Tighten to 47 Nm (35 lb-ft).
Courtesy of FORD MOTOR COMPANY
- Tighten to 47 Nm (35 lb-ft).
Courtesy of FORD MOTOR COMPANY
- Tighten to 17 Nm (150 lb-in).
Courtesy of FORD MOTOR COMPANY

Vehicles equipped with a 3.5L GTDI engine
Install the A/C compressor. Refer to Climate Control .
Vehicles equipped with a 3.5L Ti-VCT engine

Courtesy of FORD MOTOR COMPANY
Install the cooling fan assembly. Refer to Engine Cooling .
All vehicles
Connect the battery cable. Refer to Charging System (Battery, Battery Mounting And Battery Cables) .