Information & Entertainment Systems DTCS: Sync: ACM
| DTC | Description | Action |
|---|---|---|
| B1A01:01 | Speaker #1: General Electrical Failure | For a LHF door speaker concern, GO to Pinpoint Test G For a LHF door tweeter speaker concern, GO to Pinpoint Test H |
| B1A01:11 | Speaker #1: Circuit Short To Ground | For a LHF door speaker concern, GO to Pinpoint Test G For a LHF door tweeter speaker concern, GO to Pinpoint Test H |
| B1A01:12 | Speaker #1: Circuit Short To Battery | For a LHF door speaker concern, GO to Pinpoint Test G For a LHF door tweeter speaker concern, GO to Pinpoint Test H |
| B1A01:13 | Speaker #1: Circuit Open | GO to Pinpoint Test G |
| B1A02:01 | Speaker #2: General Electrical Failure | For a RHF door speaker concern, GO to Pinpoint Test I For a RHF door tweeter speaker concern, GO to Pinpoint Test J |
| B1A02:11 | Speaker #2: Circuit Short To Ground | For a RHF door speaker concern, GO to Pinpoint Test I For a RHF door tweeter speaker concern, GO to Pinpoint Test J |
| B1A02:12 | Speaker #2: Circuit Short To Battery | For a RHF door speaker concern, GO to Pinpoint Test I For a RHF door tweeter speaker concern, GO to Pinpoint Test J |
| B1A02:13 | Speaker #2: Circuit Open | GO to Pinpoint Test I |
| B1A03:01 | Speaker #3: General Electrical Failure | For a RHR door speaker concern, GO to Pinpoint Test K For a RHR door tweeter speaker concern, GO to Pinpoint Test L |
| B1A03:11 | Speaker #3: Circuit Short To Ground | For a RHR door speaker concern, GO to Pinpoint Test K For a RHR door tweeter speaker concern, GO to Pinpoint Test L |
| B1A03:12 | Speaker #3: Circuit Short To Battery | For a RHR door speaker concern, GO to Pinpoint Test K For a RHR door tweeter speaker concern, GO to Pinpoint Test L |
| B1A03:13 | Speaker #3: Circuit Open | GO to Pinpoint Test K |
| B1A04:01 | Speaker #4: General Electrical Failure | For a LHR door speaker concern, GO to Pinpoint Test K For a LHR door tweeter speaker concern, GO to Pinpoint Test N |
| B1A04:11 | Speaker #4: Circuit Short To Ground | For a LHR door speaker concern, GO to Pinpoint Test K For a LHR door tweeter speaker concern, GO to Pinpoint Test N |
| B1A04:12 | Speaker #4: Circuit Short To Battery | For a LHR door speaker concern, GO to Pinpoint Test K For a LHR door tweeter speaker concern, GO to Pinpoint Test N |
| B1A04:13 | Speaker #4: Circuit Open | GO to Pinpoint Test M |
| B1A06:01 | Speaker #6: General Electrical Failure | GO to Pinpoint Test O |
| B1A06:11 | Speaker #6: Circuit Short To Ground | GO to Pinpoint Test O |
| B1A06:12 | Speaker #6: Circuit Short To Battery | GO to Pinpoint Test O |
| B1A06:13 | Speaker #6: Circuit Open | GO to Pinpoint Test O |
| B1A56:21 | Antenna: Signal Amplitude < Minimum | GO to Pinpoint Test A |
| B1A89:11 | Satellite Antenna: Circuit Short To Ground | GO to Pinpoint Test B |
| B1A89:13 | Satellite Antenna: Circuit Open | GO to Pinpoint Test B |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | GO to Pinpoint Test AE |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test AF |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test AH |
| U0237:00 | Lost Communication With Digital Audio Control Module "C": No Sub Type Information | GO to Pinpoint Test AM |
| U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information | GO to Pinpoint Test AN |
| U0256:00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AO |
| U0257:00 | Lost Communication With Front Controls / Display Interface Module: No Sub Type Information | GO to Pinpoint Test AP |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the ACM or DACMC. If there have been recent service actions with the ACM or DACMC, INSTALL ACM as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built. If there have been no recent service actions, INSTALL a new ACM to correct the failure to retain configuration data. REFER to: Audio Front Control Module (ACM) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the ACM or DACMC. If there have been recent service actions with the ACM or DACMC, INSTALL ACM as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built. If there have been no recent service actions, INSTALL a new ACM to correct the failure to retain configuration data. REFER to: Audio Front Control Module (ACM) . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the ACM or DACMC. If there have been recent service actions with the ACM or DACMC, INSTALL ACM as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built. If there have been no recent service actions, INSTALL a new ACM to correct the failure to retain configuration data. REFER to: Audio Front Control Module (ACM) . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:42 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) . |
| U3000:96 | Control Module: Component Internal Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:96 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AR |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AS |