Information & Entertainment Systems DTCS: Sync: DACMC
| DTC | Description | Action |
|---|---|---|
| B116A:01 | Handset Microphone: General Electrical Failure | GO to Pinpoint Test Z |
| B117A:01 | Backup Microphone: General Electrical Failure | GO to Pinpoint Test AA |
| B13F5:01 | Microphone 3: General Electrical Failure | GO to Pinpoint Test AB |
| U0100:00 | Lost Communication With ECM/PCM "A": No Sub Type Information | GO to Pinpoint Test AE |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test AF |
| U2024:00 | Control Module Cal-Config Data: No Sub Type Information | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the ACM or DACMC. If there have been recent service actions with the ACM or DACMC, INSTALL DACMC as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built. If there have been no recent service actions, INSTALL a new ACM to correct the failure to retain configuration data. REFER to: Audio Front Control Module (ACM) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the ACM or DACMC. If there have been recent service actions with the ACM or DACMC, INSTALL DACMC as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built. If there have been no recent service actions, INSTALL a new ACM to correct the failure to retain configuration data. REFER to: Audio Front Control Module (ACM) . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the ACM or DACMC. If there have been recent service actions with the ACM or DACMC, INSTALL DACMC as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built. If there have been no recent service actions, INSTALL a new ACM to correct the failure to retain configuration data. REFER to: Audio Front Control Module (ACM) . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:42 is retrieved again, INSTALL a new ACM. REFER to: Audio Front Control Module (ACM) . |
| U3000:92 | Control Module: Performance or Incorrect Operation | GO to Pinpoint Test D |
| U3000:94 | Control Module: Unexpected Operation | If an observable symptom is not present, DISREGARD this DTC. If an observable symptom is present, GO to Pinpoint Test D |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AR |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AS |