Steering Column: Installation

NOTE: Transfer parts as needed.

To install, reverse the removal procedure.
If the SRS was depowered. Repower the SRS. Refer to: Supplemental Restraint System (SRS) Depowering and Repowering .
If equipped with memory steering column, use the steering column control switch and set the tilt motor soft stops as follows.
1. Move the column upward until it reaches the end of travel.
2. Move the column in the same direction until it reaches the end of travel again.
3. Move the column downward until it reaches the end of travel.
4. Move the column in the same direction until it reaches the end of travel again.
Courtesy of FORD MOTOR COMPANY
If equipped with memory steering column, use the steering column control switch and set the tilt motor soft stops as follows.
1. Move the column rearward until it reaches the end of travel.
2. Move the column in the same direction until it reaches the end of travel again.
3. Move the column forward until it reaches the end of travel.
4. Move the column in the same direction until it reaches the end of travel again.

Courtesy of FORD MOTOR COMPANY