FixVault
Home › Ford › 2020 › Edge ST-Line, FWD › Repair and Diagnosis › Brakes › Brakes Control Systems › Abs Guided Routine › Pinpoint Tests › Pinpoint Tests AT: The ABS Module Does Not Respond To The Diagnostic Scan Tool › Possible Causes

Possible Causes

  1. AT1: VERIFY THE NO COMMUNCATION DIAGNOSTICS HAVE BEEN PERFORMED 
    NOTE: Diagnostics in the Module Communications Network article MUST BE CARRIED OUT before continuing with this pinpoint test.
    • Has the appropriate pinpoint test in the Module Communications Network been carried out for the no communication concern? 
About FixVault