FixVault
Home › Ford › 2020 › Edge ST-Line, FWD › Repair and Diagnosis › External Pages › Different car › Section 46 (Steering Wheel And Column Electrical Components) › Removal And Installation › Steering Column Lock Module › Installation

Steering Column Lock Module: Installation

WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Using a diagnostic scan tool, complete the PMI process for the BCM following the on-screen instructions.

  3. NOTE: This step is only necessary when installing a new component.

    Carry out the BCM to steering column lock module training procedure.

  4. NOTE: This step is only necessary when installing a new component.

    Carry out the BCM self-test. Clear the Diagnostic Trouble Codes (DTCs) and then retrieve the Diagnostic Trouble Codes (DTCs) from the BCM to confirm all Diagnostic Trouble Codes (DTCs) have been cleared.

About FixVault