Body Control Module (BCM): Installation

WARNING: This page is about a different car, the 2020 Lincoln Corsair. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
NOTE: Carry out the remaining steps only if installing a new BCM (body control module).
Using a diagnostic scan tool, complete the PMI configuration following the on-screen instructions. Refer to: Module Configuration - System Operation and Component Description .
Using a diagnostic scan tool, carry out the BCM self-test (must include an on-demand self-test) and then repeat the self-test to confirm all DTC have been cleared.