FixVault
Home › Ford › 2020 › F-250 Super Duty Limited › Repair and Diagnosis › Engine Performance › System › Engine Controls - Pinpoint Tests (Diesel) - Fault Code Index, Pinpoint Tests A - An › Pinpoint Tests An: Power Take Off (PTO) Control › Introduction

Pinpoint Tests An: Power Take Off (PTO) Control: Introduction

NOTE: Regeneration may occur during normal operation. During regeneration, diagnostic procedures may display biased values. If a regeneration occurs during diagnostic procedures, allow the process to complete before continuing diagnostics.

This pinpoint test is intended to diagnose the following:

Fig 1: Powertrain Control Module-B (PCM-B) Connector
G13533692Courtesy of FORD MOTOR CO.

Harness Side

Circuit Pin
Fig 2: Powertrain Control Module-T (PCM-T) Connector
G13533693Courtesy of FORD MOTOR CO.

Harness Side

Circuit Pin
PTO (Power Take Off) 19
PTO2 (Power Take Off 2) 18
About FixVault