Abs Guided Routine - Pinpoint Tests G - ZA

• Pinpoint Tests G: C1020:00
  • Normal Operation And Fault Conditions
  • Possible Cause
• Pinpoint Tests H: Hydraulic Pump Faults
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
  • Visual Inspection And Diagnostic Pre-Checks
• Pinpoint Tests I: SASM Module Reset Concern
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests J: Abs (Anti-Lock Brake System) Module Communication Concern With SASM (Steering Angle Sensor Module)
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests K: SASM Battery Voltage Signal Compare Concern
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests L: Brake Fluid Level
  • Normal Operation And Fault Conditions
  • Possible Causes
  • Visual Inspection And Diagnostic Pre-Checks
• Pinpoint Tests La: Steering Wheel Position Sensor Signal Fault
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests Lb: Steering Wheel Position Sensor Faults
• Pinpoint Tests M: Front Wheel Speed Sensor Electrical Faults
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
  • Visual Inspection And Diagnostic Pre-Checks
• Pinpoint Tests N: Rear Wheel Speed Sensor Electrical Faults
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
  • Visual Inspection And Diagnostic Pre-Checks
• Pinpoint Tests O: The Traction Control System Is Inoperative Or Cannot Be Disabled Using The Traction Control Switch
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests OA: The Hill Descent Control System Is Inoperative, Cannot Be Disabled Or Enabled
• Pinpoint Tests Ob: The SELECTABLE Drive Mode Feature Is Inoperative
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
  • Visual Inspection And Diagnostic Pre-Checks
• Pinpoint Tests OC: The Snow/Sand Mode Feature Is Inoperative, Cannot Be Disabled Or Enabled
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests P: SASM Incompatibility Concern
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests Q: Abs Module Communication Concern With TCM
• Pinpoint Tests QA: Abs Module Communication Concern With The TCCM
• Pinpoint Tests R: Abs (Anti-Lock Brake System) Module Communication Concern With Advanced Driver Assistance System (ADAS)
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests S: Abs Module Communication Concern With TBM
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests T: SASM (Steering Angle Sensor Module) Communication Concern With BCM (Body Control Module)
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests U: The Brake Booster Vacuum Pump Is Inoperative
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
  • Visual Inspection And Diagnostic Pre-Checks
• Pinpoint Tests V: The Brake Booster Vacuum Pump Runs Continuously
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests W: Abs Module Communication Concern With HVAC Module
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests X: Abs Temperature Too High
• Pinpoint Tests Y: Abs (Anti-Lock Brake System) Module Internal Fault Concern
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
  • Visual Inspection and Pre-Checks
• Pinpoint Tests Ya: Software Incompatibility With Brake Booster Control
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests Z: Abs (Anti-Lock Brake System) Module Configuration Concern
  • Notes
  • Normal Operation And Fault Conditions
  • Possible Causes
• Pinpoint Tests ZA: Tire Diameter
  • Normal Operation And Fault Conditions
  • Possible Causes