FixVault
Home › Ford › 2021 › Edge ST-Line, FWD › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System (Abs) And Stability Control › Removal And Installation › Hydraulic Control Unit (HCU) › Installation

Hydraulic Control Unit (HCU): Installation

  1. To install, reverse the removal procedure.
  2. Bleed the brake system. Refer to: Brake System Pressure Bleeding

    .

  3. If a new HCU is being installed, carryout the IVD Initialization Sequence and Valve Calibration using the scan tool and following the scan tool on-screen instructions.
About FixVault