P264F - Engine Serial Number Not Programmed Or Incompatible
DTC DESCRIPTION P264F - ENGINE SERIAL NUMBER NOT PROGRAMMED OR INCOMPATIBLE
| Description: | This DTC sets when the PCM does not receive a valid engine serial number during reprogramming. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The VID block must be programmed. Refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST QA . | ||