Factory Keycode Retrieval

WARNING: This page is about a different car, the 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

The factory keycode for the keyless entry keypad can be retrieved from a label on the BCM, a wallet card in the Owner's Literature, using a diagnostic scan tool, or by using 2 programmed keys.

To retrieve the factory keycode using 2 programmed keys, carry out the following steps within 10 seconds:

Place the first programmed key into the ignition lock cylinder or backup starting location and turn the ignition on.
Turn the ignition off and remove the first programmed key.
Place the second programmed key into the ignition lock cylinder or backup location and turn the ignition on.

NOTE: Any warning messages that may be present are displayed in the message center prior to the keycode being displayed.

The factory keycode displays momentarily in the message center.