Snow Plow Package
WARNING: This page is about a different car, the 2021 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
The optional snowplow package utilizes a switch on the instrument panel and blunt cut for customer access. When snowplow mode is enabled, a ground signal is received by the HVAC module. The HVAC module sends a message to the BCM which then grounds the rear heated seats/customer access relay control circuit. When the relay is energized, power is diverted from the rear heated seats and applied to the customer access blunt cut. When snowplow mode is active, the following systems are disabled:
- AC inverter
- Fog lamps
- Heated steering wheel
- Heated and cooled seats
For more information on the snowplow package, refer to the Owner's Literature.