FixVault
Home › Ford › 2021 › Edge ST › Repair and Diagnosis › External Pages › Different car › Section 34 (Climate Control System - General Information) › Removal And Installation › Condenser Inlet Line › Installation

Condenser Inlet Line: Installation

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Install and lubricate new O-ring seals. Refer to the appropriate Specifications .

  3. Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to the appropriate Refrigerant Oil Adding .
About FixVault