FixVault
Home › Ford › 2021 › Escape Titanium Plug-In Hybrid › Repair and Diagnosis › Steering › Power Steering › Removal And Installation › Steering Gear › Removal

Steering Gear: Removal

  1. Remove the front subframe. Refer to: Front Subframe .
    1. Remove and discard the steering gear retainers.
    2. Position the steering gear to the RH side then remove it from the front subframe.
    GFD586297Courtesy of FORD MOTOR COMPANY
  3. NOTE: This step is only necessary when installing a new component.

    Remove the retainers and the steering gear shield.

GFD586298Courtesy of FORD MOTOR COMPANY
About FixVault