FixVault
Home › Ford › 2021 › F-150 Raptor › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System - General Information › General Procedures › Run the Engine

Run the Engine

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING INFORMATION

Activation 

  1. Place the vehicle in PARK.
  2. Push the start button to enter the accessory mode.
  3. Press the brake pedal and accelerator pedal together for 5 seconds.
  4. Steps 5 and 6 should be performed within 15 seconds after completing Step 3.
  5. Release both the accelerator and brake pedals.
  6. Press the brake pedal and push the start button so that the vehicle is in drivable state.
  7. Press the brake pedal and accelerator pedal together for 5 seconds.
  8. When this sequence is complete, the vehicle enters the diagnostic mode and the engine should remain running continuously.
About FixVault