FixVault
Home › Ford › 2021 › Mustang Mach 1 Premium, Automatic Trans › Repair and Diagnosis › Electrical › Gauges › Instrument Panel And Console › Removal And Installation › Overhead Console › Installation

Overhead Console: Installation

  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component equipped with an intrusion sensor.

    Using a diagnostic scan tool, carry out the LIN New Module Initialization procedure (Toolbox>Electrical>Service Functions>LIN New Module Initialization).

  3. NOTE: This step is only necessary when installing a new component equipped with an intrusion sensor.

    Carry out the BCM self-test. Clear the Diagnostic Trouble Codes (DTCs) and then retrieve the Diagnostic Trouble Codes (DTCs) from the BCM to confirm all Diagnostic Trouble Codes (DTCs) have been cleared.

About FixVault