Driver Front Seat Module (DSM): Installation

WARNING: This page is about a different car, the 2021 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
NOTE: This step is only necessary when installing a new component.

Using a diagnostic scan tool, complete the PMI process for the DSM following the on-screen instructions.
NOTE: This step is only necessary when installing a new DSM (driver front seat module).

Operate the seat in all directions through the full range of travel to set soft stops and avoid a premature stopping point occurrence after the vehicle is returned to the customer.