Pinpoint Test D: P0607
- Normal Operation and Fault Conditions
Refer to the DTC Fault Trigger Conditions.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition PCM P0607:00 Control Module Performance: No Sub Type Information This DTC sets when the PCM internal central processing unit (CPU) has encountered an error. The PCM monitors itself and carries out internal checks of its own CPU. This DTC sets if any of these checks return an incorrect value. Possible Sources
- Module programming error
- Aftermarket performance products
- Damaged PCM
- D1 CHECK FOR PCM (POWERTRAIN CONTROL MODULE) DTC (DIAGNOSTIC TROUBLE CODE) S
- Using a diagnostic scan tool, perform the PCM self-test.
- Check for any other PCM related symptoms.
Is DTC P0607 the only DTC present?
Yes Reprogram or update the calibration. Refer to the appropriate procedure in appropriate Module Configuration article. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products.Repeat the self test. If the concern is still present, INSTALL a new PCM. Refer to the appropriate REMOVAL AND INSTALLATION . No DIAGNOSE all PCMDTCs.