FixVault
Home › Ford › 2023 › Edge ST-Line › Repair and Diagnosis › External Pages › Different car › Section 1068 (Bumpers) › Disassembly And Assembly › Front Bumper Cover › Assembly

Front Bumper Cover: Assembly

WARNING: This page is about a different car, the 2023 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
  1. To assemble, reverse the disassembly procedure.

    Vehicles With: Parking Aid Camera 

  2. NOTE: Carry out the following step if installing a new front camera.

    Initialize the camera. Refer to: Parking Aid Camera Initialization .

  3. Carry out the 360deg. camera alignment. Refer to: 360 Degree View Camera Alignment .

    Vehicles With: Front Fog Lamps 

  4. Adjust the fog lamp. Refer to: Front Fog Lamp Adjustment .

    Vehicles With: Front Parking Aid 

  5. Check the alignment of the front parking aid sensors. Refer to: Azimuth System Check . Refer to: Elevation System Check .
  6. If any sensor fails the check, diagnose the sensor fault. Refer to: Parking Aid .

    Vehicles With: Active Park Assist 

  7. Check the alignment of the front active park assist sensors. Refer to: Azimuth System Check .
  8. If any sensor fails the check, diagnose the sensor fault. Refer to: Parking Aid .
About FixVault