FixVault
Home › Ford › 2023 › Escape ST-Line Select › Repair and Diagnosis (Single Page) › Body & Frame › Exterior Body Panels › Body Closures › General Procedures › Power Liftgate Initialization › Programming

Power Liftgate Initialization: Programming

NOTE: This procedure clears and then sets new open and close end points in the RGTM memory.
  1. Turn the ignition ON.
  2. Using a scan tool perform the RGTM self test to complete power liftgate initialization. From the diagnostic scan tool, enter TOOLBOX > Self Test > RGTM > Run Selected Procedure.
About FixVault