FixVault
Home › Ford › 2023 › Escape ST-Line Select › Repair and Diagnosis › External Pages › Different car › Section 1116 (Handles, Locks, Latches And Entry Systems) › General Procedures › Remote Keyless Entry (RKE) Transmitter Programming

Remote Keyless Entry (RKE) Transmitter Programming

WARNING: This page is about a different car, the 2022 Ford Police Interceptor Utility and 2022 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Activation 

NOTE: This procedure is used only for vehicles that have a Remote Keyless Entry (RKE) transmitters and NOT an Integrated Key Transmitters (IKT).
NOTE: Up to 4 Remote Keyless Entry (RKE) transmitters may be programmed using this procedure.
NOTE: The serial number for the Wired-In Connectivity Module is also displayed in the Remote Keyless Entry (RKE) serial number storage area. (if programmed following delivery of the vehicle).
NOTE: Serial numbers can also be deleted to allow new serial numbers to be added and saved.
  1. From the diagnostic scan tool, enter TOOLBOX. Select BCM> BCM - Remote Keyless Entry (RKE) Transmitter Programming and follow the on-screen instructions to program the RKE transmitter. As indicated, PATS is not being programmed only the transmitter in the stand alone RKE transmitter.
  2. Disassemble the RKE transmitter. Review the Owner's Literature for information on replacing the RKE transmitter battery.
  3. As prompted in the following screens enter the 48 digit serial number found inside the RKE transmitter. If this is a new RKE transmitter, the serial number is also located with the packaging.
  4. Depress the Unlock button on the RKE transmitter to confirm that the RKE transmitter has been successfully programmed.
About FixVault