Anti-Lock Brake System (ABS) Module: Installation
WARNING: This page is about a different car, the 2022 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse the removal procedure.
- Using a diagnostic scan tool, complete the PMI process for the ABS module following the on-screen instructions.
- Carry out the Brake System Pressure Bleeding, the Accelerometer Configuration and the ABS Module Bleed Configuration service functions using the scan tool and following the diagnostic scan tool on-screen instructions.
- Run the PCMPATS programming application and then carry out the Module Initialization (Parameter Reset) using the scan tool and following the diagnostic scan tool on-screen instructions.