FixVault
Home › Ford › 2023 › Escape ST-Line Select › Repair and Diagnosis › External Pages › Different car › Section 1482 (Wipers And Washers) › Removal And Installation › Windshield Washer Fluid Level Sensor › Removal

Windshield Washer Fluid Level Sensor: Removal

WARNING: This page is about a different car, the 2023 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Remove the windshield washer reservoir. Refer to: Windshield Washer Reservoir .
  2. Remove the windshield washer fluid level sensor.

    1. Disconnect the windshield washer fluid level sensor electrical connector.
    2. Remove the windshield washer fluid level sensor.

GFD747692Courtesy of FORD MOTOR COMPANY
About FixVault