Section 896 (Anti-Lock Brake System (Abs) And Stability Control)
WARNING: This page is about a different car, the 2022 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Anti-Lock Brake System (ABS) and Stability Control - Overview
- Anti-Lock Brake System (ABS) and Stability Control - System Operation and Component Description
- System Operation
- System Diagrams
- Network Message Chart
- Anti-Lock Brake System (ABS)
- Auto Hold
- Electronic Brake Force Distribution (EBD)
- Electronic Parking Brake (EPB) Features
- Emergency Brake Assist (EBA)
- Hill Start Assist
- Hydraulic Fade Compensation and Brake Fluid Support
- Supplemental Braking Assist
- Vacuum On Demand System
- AdvanceTrac
- Roll Stability Control (RSC)
- Trailer Sway Control
- Selectable Drive Modes
- MyKey® Interaction
- Stability-Traction Control Indicator (Sliding Car Icon)
- Stability-Traction Control Disabled Indicator (Sliding Car OFF Icon)
- Component Description
- Anti-Lock Brake System (ABS) Module - Vehicles with Vacuum Brake Boost
- Auto Hold Switch
- Brake Fluid Level Switch
- Drive Mode Switch
- Electric Brake Booster (EBB) Assembly - Vehicles with Electric Brake Boost
- Hydraulic Control Unit (HCU) - Vehicles with Vacuum Brake Boost
- Stability Control Sensors
- Traction Control Switch
- Wheel Speed Sensor
- Wheel Speed Sensor Encoders
- System Operation
- Diagnosis And Testing
- Anti-Lock Brake System (ABS) and Stability Control
- Diagnostic Trouble Code (DTC) Chart
- Symptom Charts
- Pinpoint Tests
- Pinpoint Test A: Abs Module Low Voltage Concern
- Pinpoint Test CE: Abs Module Communication Concern With HVAC Module
- Pinpoint Test C: Brake Booster Vacuum Sensor Faults
- Pinpoint Test D: Abs Module Communication Concern With BCM
- Pinpoint Test E: The Hill Start Assist Feature Is Inoperative
- Pinpoint Test F: Abs Module High Voltage Concern
- Pinpoint Test G: Reduced System Function
- Pinpoint Test H: Hydraulic Pump Faults
- Pinpoint Test Co: Electric Brake Booster (Ebb) Unit Internal Failure
- Pinpoint Test Av: Abs Module Communication Concern With GSM
- Pinpoint Test ZA: Tire Diameter Concerns
- Pinpoint Test L: Electric Brake Booster (Ebb) Brake Fluid Level
- Pinpoint Test M: Front Wheel Speed Sensor Electrical Faults
- Pinpoint Test N: Rear Wheel Speed Sensor Electrical Faults
- Pinpoint Test O: The Traction Control System Is Inoperative Or Cannot Be Disabled Using The Traction Control Switch
- Pinpoint Test P: Pats Target Identifier
- Pinpoint Test La: Steering Wheel Sensor Position Faults
- Pinpoint Test R: Abs Module Communication Concern With CCM
- Pinpoint Test BQ: Abs Module Communication Concern With IPMA
- Pinpoint Test T: Brake System Fill Not Complete
- Pinpoint Test U: The Hill Descent Control Feature Is Inoperative
- Pinpoint Test V: No Power Brake Assist Or Excessive Power Brake Assist - Ebb System
- Pinpoint Test Bf: Abs False Activation, Abs Too Sensitive, Abs Activates On Normal Stop
- Pinpoint Test X: Control Module Improper Wake-Up Performance
- Pinpoint Test Y: Abs Module Internal Fault Concern
- Pinpoint Test Z: Module Configuration Concern
- Pinpoint Test Aa: The SELECTABLE Drive Mode Feature Is Inoperative, Cannot Be Enabled Or Disabled
- Pinpoint Test Ab: Wheel Speed Sensor Erratic Signal Faults
- Pinpoint Test Ac: Brake Pedal Switch Faults
- Pinpoint Test Ad: Stability System Active Too Long Concern
- Pinpoint Test AE: Abs Module Communication Concern With PSCM
- Pinpoint Test AF: Abs Module VIN Mismatch
- Pinpoint Test Ag: The Abs Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ah: Stability Control Sensor Signal Failure Faults
- Pinpoint Test Ai: Abs Module Communication Concern With Pcm
- Pinpoint Test AJ: The Brake Warning Indicator, Abs Warning Indicator Or Stability-Traction Control Indicator (Sliding-Car Icon) Is Always On Or Never On
- Pinpoint Test BP: Abs Module Communication Concern With GWM
- Pinpoint Test Al: Incorrect Wheel Speed Sensor Fault
- Pinpoint Test Am: Brake Pressure Sensor Faults
- Pinpoint Test An: Stability Control Sensor Initialization Fault
- Pinpoint Test AO: The Auto Hold Feature Is Inoperative, Cannot Be Disabled Or Enabled
- Pinpoint Test Bx: Abs Module Communication Concern With AWD Module
- Pinpoint Test AQ: Cruise Control Braking Fault
- Pinpoint Test Ar: Abs Module Communication Concern With IPC
- Pinpoint Test As: Abs Module Communication Concern With FCIM
- Pinpoint Test Cp: Electric Brake Booster (Ebb) Motor Faults
- Pinpoint Test Cm: Abs Module Communication Concern With HEV-Pcm
- Pinpoint Test BH: Stability Control Sensor Signal Failure Faults
- Anti-Lock Brake System (ABS) and Stability Control
- Removal And Installation
- Anti-Lock Brake System (ABS) Module - Vehicles With: Vacuum Brake Booster
- Electric Brake Booster (EBB)
- Electric Brake Booster (EBB) - Full Hybrid Electric Vehicle (FHEV)/Plug-In Hybrid Electric Vehicle (PHEV)
- Front Wheel Speed Sensor
- Hydraulic Control Unit (HCU) - Vehicles With: Vacuum Brake Booster
- Rear Wheel Speed Sensor - AWD
- Rear Wheel Speed Sensor - FWD