Abs Guided Routine Testing - Pinpoint Tests I - ZA

• Pinpoint Tests I: ABS Module Communication Concern With PCM - TCM
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests J: ABS Module Communication Concern With SASM
• Pinpoint Tests K: SASM Battery Voltage Signal Compare Concern
  • Notes
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests L: SASM Signal Failure Faults
  • Normal Operation and Fault Conditions
  • Possible Causes
  • Visual Inspection and Diagnostic Pre-checks
• Pinpoint Tests LA: Steering Wheel Position Sensor Signal Fault
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests LB: Steering Wheel Position Sensor Faults
• Pinpoint Tests M: Front Wheel Speed Sensor Electrical Faults
  • Notes
  • Normal Operation and Fault Conditions
  • Possible Causes
  • Visual Inspection and Diagnostic Pre-checks
• Pinpoint Tests N: Rear Wheel Speed Sensor Electrical Faults
  • Notes
  • Normal Operation and Fault Conditions
  • Possible Causes
  • Visual Inspection and Diagnostic Pre-checks
• Pinpoint Tests O: The Traction Control System Is Inoperative Or Cannot Be Disabled Using The Traction Control Switch
  • Notes
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests OA: The Hill Descent Control System Is Inoperative Or Cannot Be Disabled
• Pinpoint Tests OB: The Selectable Drive Mode Feature Is Inoperative
  • Notes
  • Normal Operation and Fault Conditions
  • Possible Causes
  • Visual Inspection and Diagnostic Pre-checks
• Pinpoint Tests OC: The Snow/Sand Mode Feature Is Inoperative, Cannot Be Disabled Or Enabled
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests P: SASM Incompatibility Concern
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests Q: ABS Module Communication Concern With TCM
• Pinpoint Tests QA: ABS Module Communication Concern With The TCCM
• Pinpoint Tests R: ABS Module Communication Concern With CCM
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests S: ABS Module Communication Concern With TBM
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests SA: ABS Module Communication Concern With The Park Brake Control Module
• Pinpoint Tests T: SASM Communication Concern With BCM
  • Normal Operation and Fault Conditions
• Pinpoint Tests U: The Brake Booster Vacuum Pump Is Inoperative
  • Notes
  • Normal Operation and Fault Conditions
  • Possible Causes
  • Visual Inspection and Diagnostic Pre-checks
• Pinpoint Tests V: The Brake Booster Vacuum Pump Runs Continuously
  • Notes
  • Normal Operation and Fault Conditions
  • Possible Causes
  • Visual Inspection and Diagnostic Pre-checks
• Pinpoint Tests W: The Traction Control Switch LED Indicator Is Always On Or Never On
  • Notes
  • Normal Operation and Fault Conditions
  • Possible Causes
  • Visual Inspection and Diagnostic Pre-Checks
• Pinpoint Tests X: ABS Temperature Too High
• Pinpoint Tests Y: ABS Module Internal Fault Concern
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests YA: Software Incompatibility with Brake Booster Control
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests Z: Module Configuration Concern
  • Normal Operation and Fault Conditions
  • Possible Causes
• Pinpoint Tests ZA: Tire Diameter
  • Normal Operation and Fault Conditions
  • Possible Causes