Automatic Transmission External Controls
- Description And Operation
- Diagnosis And Testing
- External Controls
- Inspection and Verification
- Diagnostic Trouble Code (DTC) Chart
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: Brake Shift Interlock (BSI) Does Not Operate Properly
- Pinpoint Test B: Transmission Control Switch (TCS) Does Not Operate Properly
- Pinpoint Test C: SELECTSHIFT™ Does Not Operate Correctly
- Pinpoint Test D: The PRNDL Display Does Not Correspond To The Selected Gear
- Pinpoint Test E: The PRNDL Indicator Is Always On Or Never On
- Pinpoint Test F: Water Enters Inside The Vehicle
- Pinpoint Test G: Excessive Selector Lever Effort
- Pinpoint Test H: The Transmission Does Not Change Ranges With The Selector Lever
- Pinpoint Test I: Vibration - A High Frequency (20-80 HZ) That Is Felt Through The Seat Or Selector Lever And Changes With Engine Speed
- Pinpoint Test J: Rattle, Buzz Or Other Noise
- Pinpoint Test K: Exterior Noise
- External Controls
- General Procedures
- Removal And Installation