FixVault
Home › Ford › 2024 › Edge ST-Line › Repair and Diagnosis › Electrical › Gauges › Instrument Panel And Console › Removal And Installation › Instrument Panel › Installation

Instrument Panel: Installation

  1. To install, reverse the removal procedure.
  2. NOTE: Only use the specified material to lubricate the seals.

    Lubricate and install new O-ring seals.

    Material

    : Refrigerant Oil (WSH-M1C231-B)

  3. Fill and bleed the cooling system. Refer to: ENGINE COOLING SYSTEM DRAINING, VACUUM FILLING AND BLEEDING . Refer to: ENGINE COOLING SYSTEM DRAINING, VACUUM FILLING AND BLEEDING .
  4. NOTE: Anytime the parking brake switch electrical connector has been disconnected, the EPB system is deactivated and a DTC is stored in the EPB module. Perform the following step to restore the EPB system and clear the EPB module DTC.

    Apply and release the parking brake twice within 5 seconds, pausing with the switch in the NEUTRAL position for approximately one-half second between each apply and release.

About FixVault