FixVault
Home › Ford › 2024 › Expedition Timberline › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling › Removal And Installation › Cooling Module › Installation

Cooling Module: Installation

  1. To install, reverse the removal procedure.
  2. NOTE: Use only the specified material to lubricate the seals.

    Install new condenser fitting O-ring seals and lubricate them with clean refrigerant oil. Refer to: Specifications .

  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding .
About FixVault