FixVault
Home › Ford › 2024 › Transit-150 Base, 3.5L Eng VIN 8, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Electronic Engine Controls - 3.5L DURATEC (202KW/275PS) › Removal And Installation › Powertrain Control Module (PCM) › Installation

Powertrain Control Module (PCM): Installation

  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Upload the module information from the diagnostic tool using the Programmable Modules Installation routine. Refer to: Module Programming .

  3. NOTE: This step is only necessary when installing a new component.

    Carry out the Parameter Reset procedure. Refer to PASSIVE ANTI-THEFT SYSTEM (PATS) - VEHICLES WITH: KEYED IGNITION

  4. NOTE: This step is only necessary when installing a new component.

    Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.

About FixVault