FixVault
Home › Ford › 2024 › Transit-350 Base, Van Cargo Extended, 3.5L Eng VIN G, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Electronic Engine Controls - 3.5L ECOBOOST (235KW/320PS) › Removal And Installation › Powertrain Control Module (PCM) › Installation

Powertrain Control Module (PCM): Installation

  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Upload the module information from the diagnostic tool using the Programmable Modules Installation routine. efer to: Module Programming .

  3. NOTE: This step is only necessary when installing a new component.

    Carry out the Parameter Reset procedure. efer to: Anti-Theft Key Programming - Scan Tool (419-01 Passive Anti-Theft System (PATS) - 3.5L EcoBoost (235kW/320PS)).

  4. NOTE: This step is only necessary when installing a new component.

    Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.

About FixVault