Injection Nozzles: Installation
- Use new compression seal and install nozzle. Tighten nozzle with injector tool.
- Install fuel injection line. Install fuel return line. Start engine and check for leaks.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
| Injection Pump-to-Front | ||
| Cover Nuts | 30 (40) | |
| Fuel Injection Lines | 20 (27) | |
| Application | INCH Lbs. (N.m) | |
| Injection Pump Guide Stud | 85 (9) | |
| Inj. Pump Hydraulic | ||
| Head Bolts | 5-18 (20-24) | |
| Inj. Pump Auto. | ||
| Advance Plugs | 75-100 (8-11) | |