FixVault
Home › GMC › 1986 › Jimmy 6.2 C › Repair and Diagnosis (Single Page) › Accessories & Equipment › Cruise Control Systems › Testing › Control Module Resistance Check

Control Module Resistance Check

  1. With control module disconnected and servo connected, probe terminal "C" to ground with ohmmeter. Reading should be 30-55 ohms. With servo disconnected probe terminal "C" to ground. Reading should be infinity (open circuit).
  2. With servo connected, probe terminals "F" to "H". Reading should be 15-25 ohms. With servo disconnected, probe terminal "F" to ground. Reading should be infinity (open circuit). With servo disconnected, probe terminal "H" to ground. Reading should be infinity (open circuit).
  3. With servo connected, probe terminal "K" to ground. Reading should be 30-55 ohms. With servo disconnected, probe terminal "K" to ground. Reading should be infinity (open circuit).
  4. With servo connected or disconnected, probe terminal "J" to ground. Reading should be 0 ohms (closed circuit).
About FixVault