FixVault
Home › GMC › 1992 › Magnavan 6.2 J › Repair and Diagnosis › Body & Frame › Power Windows › Removal & Installation › Vent/Window Run Channel Assembly › Removal

Vent/Window Run Channel Assembly: Removal

  1. Lower the window.
  2. Remove the trim panel. See TRIM PANEL  .
  3. Remove run channel molding (224). See Figure . Pull the molding out of the vent assembly only.
  4. Remove the door panel to run channel bolt (228). See Figure .
  5. Remove the door to ventilator screws. See Figure .
  6. Remove door vent/window run channel assembly (229) to the vehicle. See Figure . Pull the top of the vent away from the door frame. Lift and rotate the assembly out of the door.
About FixVault