FixVault
Home › GMC › 1994 › Forward Control 7.4 N › Repair and Diagnosis › External Pages › Different car › Section 18 (Air Bag Restraint System) › Removal & Installation › Inflator Module › Installation (Driver-Side)

Installation (Driver-Side)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1994 GMC Vandura Special, 1994 GMC Vandura, 1994 GMC Rally Camper Special, 1994 GMC Rally, and 1994 Chevrolet Sportvan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install horn contact, steering wheel inflator module connector and CPA clip. Install inflator module to steering wheel. Tighten inflator module screws to proper specification. See TORQUE SPECIFICATIONS.
  2. To complete installation, reverse removal procedure. Reactivate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK.
About FixVault