Draining & Refilling: Transmission/Transaxle
- Loosen transmission/transaxle oil pan bolts. Pry pan loose and allow fluid to drain. Remove oil pan, gasket, and filter or filter screen. Replace paper element filter (if equipped).
- Clean filter screen (if equipped) and pan with solvent, and blow dry with compressed air. Install oil pan with NEW gasket. Add fluid to proper mark on dipstick.
NOTE:
On 4WD vehicles it may be necessary to remove the crossmember at the rear of the transmission to allow adequate clearance for transmission oil pan removal. Forcing the pan past the crossmember may damage the internal transmission wiring harness or solenoid connections.