Right Window Inoperative From Both Left & Right Switch/Left Window Operates Okay
- Turn ignition switch to RUN position. Connect test light between right window regulator motor connector terminals "A" (Brown wire) and "B" (Dark Blue wire). Operate window switch between UP and DOWN positions. If test light does not illuminate in both positions, go to next step. If test light illuminates in both positions, check right window regulator motor for poor terminal contact. If connection is okay, replace right window regulator motor.
- Connect test light between right door lock and side window switch 11-pin connector C1, terminals "J" (Light Blue wire) and "L" (Tan wire). Operate right window switch (at left window switch) between UP and DOWN positions. If test light illuminates in both directions, go to next step. If test light does not illuminate in both directions, go to step 4).
- Connect test light between right door lock and side window switch connector C1, terminals "G" (Dark Blue wire) and "K" (Brown wire). Operate right window switch between UP and DOWN positions. If test light illuminates in both positions, repair open in Dark Blue or Brown wire between right door lock and side window switch and right window regulator motor. If test light does not illuminate in both positions, check right door lock and side window switch for poor terminal contact. If connection is okay, replace right door lock and side window switch.
- Connect test light between left window switch 8-pin connector C2, terminals "B" (Light Blue wire) and "D" (Tan wire). Operate switch for inoperative window at left window switch. If test light illuminates in both positions, repair open in Light Blue or Tan wires between left window switch and right door lock and side window switch. If test light does not illuminate in both positions, replace left door lock and side window switch.