Disabling System
WARNING: This page is about a different car, the 1997 Oldsmobile Bravada, 1997 GMC Sonoma, 1997 GMC Jimmy, 1997 Chevrolet S10 Pickup, and 1997 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Turn steering wheel to place vehicle wheels in straight-ahead position. Turn ignition switch to LOCK position.
- Remove AIR BAG fuse. Remove I/P sound insulator. Remove Connector Position Assurance (CPA) clip and disconnect Yellow 2-way SIR connector at base of steering column.
- Wait 2 minutes before beginning service. All connectors in SIR system use CPA clips to ensure connector retention. Even if system is disconnected, use caution when working near air bags.