FixVault
Home › GMC › 2001 › C3500 HD 6.5 F, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 6.5L (L65) (Introduction) › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: IAT Sensor
    GM73425Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the IAT sensor.

    Tighten:  Tighten the IAT sensor to 25 N.m (18 lb ft).

    2. Fig 2: IAT Electrical Connector
    GM26952Courtesy of GENERAL MOTORS CORP.
  2. Install the electrical connector.
  3. Install the negative battery cables.
About FixVault