FixVault
Home › GMC › 2001 › C3500 HD 6.5 F, Automatic › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Pulley Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS COMPANY
  1. Place the power steering pump pulley on the end of the power steering pump shaft.
  2. Install the power steering pump pulley using J 25033-C .
    3. Fig 2: Checking Power Steering Pump Pulley Installed Depth
    GM245012Courtesy of GENERAL MOTORS COMPANY
  3. Ensure that the power steering pump pulley (1) is flush against the power steering pump shaft (2), with an allowable variance of 0.25 mm (0.010 in).
  4. Install the drive belt. Refer to Drive Belt Replacement Engine Mechanical - 4.3L, or Drive Belt Replacement - Accessory Engine Mechanical - 4.8L, 5.3L, and 6.0L, or Drive Belt Replacement Engine Mechanical - 6.6L, or Drive Belt Replacement - Accessory Engine Mechanical - 8.1L.
  5. Install the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement in Engine Cooling.
About FixVault