Installation Procedure

Fig 1: Front Tie Rod Components

Courtesy of GENERAL MOTORS COMPANY

Lubricate the tie rod threads with chassis lubricant. Refer to Fluid and Lubricant Recommendations .
Install the tie rod end (4) to the shaft (6).
Install the outer tie rod ball stud (3) to the steering knuckle (1).

Fig 2: Front Tie Rod Components

Courtesy of GENERAL MOTORS COMPANY

Install the new prevailing torque nut (2) to the outer tie rod ball stud (3).
Tighten
- Tighten the nut to 50 N.m (37 lb ft) for 15 series vehicles.
- Tighten the nut to 65 N.m (48 lb ft) for 25/35 series vehicles.
Adjust the front toe. Refer to Wheel Alignment Measurement .