FixVault

Installation Procedure

    Fig 1: View Of Generator (8.1L)
    GM751563Courtesy of GENERAL MOTORS COMPANY
  1. Install the generator.

    Refer to FASTENER NOTICE in Cautions and Notices.

  2. Install the generator bolts.

    Tighten 

    Tighten the generator bolts to 50 N.m (37 lb ft).

  3. Install the drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical - 8.1 L.
  4. Fig 2: View Of Generator Cable & Nut
    GM395686Courtesy of GENERAL MOTORS COMPANY
  5. Install the generator cable to the generator, perform the following:
    1. Install the generator cable.
    2. Install the generator cable nut to the terminal.

      Tighten 

      Tighten the generator cable nut to 9 N.m (80 lb in).

    3. Slide the boot over the terminal stud.
  6. Fig 3: View Of Generator Electrical Connector
    GM750525Courtesy of GENERAL MOTORS COMPANY
  7. Connect the generator electrical connector (1).
  8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) .