Installation Procedure

Refer to Fastener Notice in Cautions and Notices.

Fig 1: View Of Power Seat Switch & Screws
Courtesy of GENERAL MOTORS COMPANY
1. Install the power seat switch to bezel screws.

   Tighten 

   Tighten the screws to 2 N.m (18 lb in).

Fig 2: View Of Seat Switch Bezel
Courtesy of GENERAL MOTORS COMPANY
2. Install the power seat switch bezel to the seat. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement .
3. Install the lumbar knob, if equipped. Refer to Lumbar Support Knob Replacement .