FixVault
Home › GMC › 2001 › Yukon Denali › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Bracket Replacement (With 8.1L Engine) › Installation Procedure

Installation Procedure

    Fig 1: View Of Generator Bracket, Bolts, Nuts & Stud
    GM751458Courtesy of GENERAL MOTORS COMPANY
  1. Install the generator bracket.

    Refer to FASTENER NOTICE in Cautions and Notices.

  2. Install the generator bracket stud.

    Tighten 

    Tighten the stud to 20 N.m (15 lb ft).

  3. Install the generator bracket bolts and nut.

    Tighten 

    Tighten the bolts and nut to 50 N.m (37 lb ft)

  4. Install the generator. Refer to Generator Replacement (8.1L Engine) .
  5. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement in Engine Mechanical - 8.1L.
  6. Install the drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical - 8.1L.
  7. Install the fan and clutch. Refer to Fan Clutch Replacement in Engine Cooling.
    8. Fig 2: View Of Battery Cable Junction Block Bracket Bolts (8.1L Engine)
    GM759640Courtesy of GENERAL MOTORS COMPANY
  8. Install the battery cable junction block bracket bolts.

    Tighten 

    Tighten the bolts to 9 N.m (80 lb in).

About FixVault