Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Turn Signal/Headlamp Switch Component View

Courtesy of GENERAL MOTORS CORP.

Install the turn signal/headlamp switch (1) to the steering column. Secure the switch until the tab locks (2).
Connect the turn signal/headlamp switch electrical connector.

Fig 2: Identifying Upper Steering Column Components

Courtesy of GENERAL MOTORS CORP.

Install the steering column upper trim cover (7) to the vehicle.
Install the steering column lower trim cover (6) to the vehicle. Secure the trim cover with the 3 screws.
Enable the SIR System. Refer to SIR Disabling and Enabling Zone 3 in SIR.