FixVault
Home › GMC › 2002 › Jimmy 2D Utility, Part Time, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1328 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Steering Wheel Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Steering Wheel Module, Connector Position Assurances And Connectors
    GM820026Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Inflator Module Handling and Storage Caution in Cautions and Notices.
  1. Connect the inflator module electrical connectors (2).
  2. Connect the connector position assurances (3) to the inflator module.
  3. Install the steering wheel module (1).
    4. Fig 2: Identifying Upper Steering Column Components
    GM820027Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the bolts to the steering wheel module (1).

    Tighten:  Tighten the bolts to 8.8 N.m (78 lb in).

  5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 .
About FixVault