FixVault
Home › GMC › 2002 › Jimmy 2D Utility, Part Time, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1328 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Steering Wheel Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 .
  2. Place the front wheels in the straight ahead position.
    3. Fig 1: Identifying Upper Steering Column Components
    GM820027Courtesy of GENERAL MOTORS CORP.
  3. Remove the bolts from the steering wheel module (1).
    4. Fig 2: Steering Wheel Module, Connector Position Assurances And Connectors
    GM820026Courtesy of GENERAL MOTORS CORP.
  4. Release the connector position assurances (3) from the inflator module.
  5. Disconnect the steering wheel module connectors (2).
  6. Remove the steering wheel module (1).
  7. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to Inflator Module Handling and Scrapping .
About FixVault