Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Tab

Courtesy of GENERAL MOTORS CORP.

Insert the tab on the module to the opening.

Fig 2: Removing/Installing Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer toFastener Notice in Cautions and Notices.

Install the radio antenna module bolt.
Tighten: Tighten the bolt to 6 N.m (53 lb in).

Fig 3: Removing/Installing Radio Antenna

Courtesy of GENERAL MOTORS CORP.

Attach the radio antenna cable.
Attach the body wiring harness connector.
Attach the rear window defog connectors to the glass.
Install the right rear quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper in Interior Trim.