FixVault
Home › GMC › 2002 › Jimmy 2D Utility, Part Time, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1343 (Theft Deterrent System) › Repair Instructions › Theft Deterrent Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Theft Deterrent Control Module Components
    GM886850Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel compartment door. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel Gauges and Console.
    2. CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  2. Disconnect the negative battery cable.
  3. Disconnect the electrical connector (4) from theft deterrent module (3).
  4. Remove the screw (2) from the theft deterrent module bracket (1).
  5. Remove the theft deterrent module (3) with bracket (1) from the vehicle.
  6. Remove the theft deterrent module (3) from bracket (1), if necessary.
About FixVault