FixVault
Home › GMC › 2002 › Jimmy 2D Utility, Part Time, Automatic › Repair and Diagnosis › External Pages › Different car › Section 1574 (Power Seat System) › Repair Instructions › Memory Seat Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift up on the front edge of the door lock and side window switch (1) in order to release the front retaining clip.
    Fig 1: Removing/Installing Door Lock & Side Window Switch - Driver
    GM690976Courtesy of GENERAL MOTORS CORP.
  2. Lift up on the rear edge of the switch panel in order to release the 2 rear retaining clips.
  3. Remove the electrical connector (2) from the memory seat switch.
    Fig 2: Identifying Switch Panel Electrical Connector
    GM750778Courtesy of GENERAL MOTORS CORP.
  4. Remove the memory seat switch from the lock and door lock and side window switch (1).
About FixVault